60HS Series NEMA 24 hybrid stepper motor (1.8 degree)

60HS Series NEMA 24 hybrid stepper motor (1.8 degree)

Step Angle Accuracy±5%（full step， no load）
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ max （rated current, 2 phase on）
Ambient Temperature-20℃~+50℃
Insulation Resistance100MΩ min，500VDC
Dielectric Strength500VDC for one minute
Shaft Radial Play0.02mm max（450g load）
Shaft Axial Play0.08mm max（450g load）
Max. radial force75N(20mm from the flange)
Max. axial force15N
RotationCCW
Insulation ClassB(130℃)

The hybrid stepper motors are widely used in laboratory and medical equipment, printing machines, pumps, vending machines and a multitude of other applications.

Model	length (mm)	step angle deg	resistance (Ω)	current (A)	voltage	holding torque (N.cm)	lead wires/pins	rotor inetia （g.cm²）	weight （kg）
60HS44DF045	44	1.8°	0.45	4.2	1.89	106	4	280	0.62
60HS44DF073	44	1.8°	0.73	2.8	2.044	106	4	280	0.62
60HS56DE2D	56	1.8°	2.1	2	4.2	120	8	400	0.8
60HS66DS201B	66	1.8°	2.1	2.8	4	210	6	570	1.02
60HS66DF207PJ	66	1.8°	2.7	2.8	3.36	180	4	570	1.02
60HS66DF1	66	1.8°	1	3.5	3.5	210	4	570	1.02
60HS76DF1	76	1.8°	1	3	3	210	4	720	1.18
60HS78DF304	78	1.8°	3.4	2	6.8	300	4	750	1.2
60HS78DE076	78	1.8°	0.76	3.5	2.7	208	8	750	1.2
60HS80DF075	80	1.8°	0.75	4	3	200	4	800	1.3
60HS88DE103	88	1.8°	1.3	3	3.9	215	8	930	1.48
60HS88DF065	88	1.8°	0.65	4	2.6	300	4	930	1.48
60HS88DS206	88	1.8°	2.6	2	5.2	210	6	930	1.48
60HS88DS075	88	1.8°	0.75	3.5	2.625	210	6	930	1.48
60HS100DE1	100	1.8°	1	3.5	3.5	320	8	1200	1.65
60HS100DE06	100	1.8°	0.6	5	3	352	8	1200	1.65
60HS100DF03	100	1.8°	0.3	7	2.1	440	4	1200	1.65
60HS100DF07	100	1.8°	0.7	4	2.8	400	4	1200	1.65
60HS100DF102	100	1.8°	1.2	3.5	4.2	440	4	1200	1.65
60HS100DS104	100	1.8°	1.4	3	4.2	350	6	1200	1.65
60HS100DS204	100	1.8°	2.4	2.1	5.04	280	6	1200	1.65

Customization:


Shaft	lead wire	Connector	Pulley

1. Shaft extensions: All motors can be supplied with single or double ended shaft, according to per customer's request. The length of the shaft can also be made to customer request.
2. Number of lead wires: All motors can be supplied with 4,5,6,or 8 lead wires; If requested, a connector can be added according to customer request.
3. Custom's special request: We list some typical products for selection. We can also design and produce motor according to customer special request.
4. Pulley & pinion gear: Pulley or pinion gear is available according to customer's request.