86ZW3S Series brushless DC motor

  • Winding typeYWE
  • Hall effect angle120 Degree electrical angle
  • Radial play0.02mm / 460g
  • End play0.08mm / 450g
  • Max. radial force220N @ 20mm from the flange
  • Max. axial force60N
  • Insulation classB
  • Dielectric strength500VDC for one minute
  • Insulation resistance100MΩ min., 500VDC

The brushless dc motors are widely used in such varied applications as office equipment, pumps, textile machines and much more.

Specifications:

Model Units 86ZW3S71A20 86ZW3S71C40 86ZW3S98C20 86ZW3S98E60 86ZW3S125C20 86ZW3S125E60
Number of poles
4
Number of phase
3
Rated voltage VDC 24 48 48 310 48 310
Rated speed RPM 2000 4000 2000 6000 2000 6000
Continuous stall torque N.m 0.84 0.84 1.68 1.68 2.52 2.2
Rated torque N.m 0.7 0.7 1.4 1.4 2.1 2
Rated power W 147 293 293 879 440 1256
Peak torque N.m 2.1 2.1 4.2 4.2 6.3 6
Peak current A 25 24 24.7 10.8 36 15.4
Torque constant Nm/A 0.084 0.087 0.17 0.39 0.175 0.39
Back E.M.F V/KRPM 8.9 9.25 18 41.3 18.5 41.3
Rotor inertia Kg.c㎡ 0.7 0.7 1.4 1.4 2.1 2.1
Body length mm 71 71 98 98 125 125
Voltage range VDC 12~310
Speed Range RPM 2000~6000
Weight Kg 1.9 1.9 2.6 2.6 4 4
Model Units 86ZW3S58C10 86ZW3S58C30 86ZW3S71C10 86ZW3S71C30 86ZW3S98C10 86ZW3S98C30 86ZW3S125C10 86ZW3S125C30
Number of poles
8
Number of phase
3
Rated voltage VDC 48
Rated speed RPM 1000 3000 1000 3000 1000 3000 1000 3000
Continuous stall torque N.m 0.42 0.42 0.84 0.84 1.68 1.68 2.52 2.2
Rated torque N.m 0.35 0.35 0.7 0.7 1.4 1.4 2.1 2.1
Rated power W 24.3 110 73 220 147 440 220 660
Peak torque N.m 1.05 1.05 2.1 2.1 4.2 4.2 6.3 6.3
Peak current A 2.86 8.6 5.7 17.1 11.4 34.3 17.2 51.5
Torque constant Nm/A 0.324 0.12 0.324 0.12 0.324 0.12 0.324 0.12
Back E.M.F V/KRPM 34.28 12.63 34.28 12.63 34.28 12.63 34.28 12.63
Rotor inertia g.c㎡ 0.4 0.4 0.8 0.8 1.6 1.6 2.4 2.4
Body length mm 58 58 71 71 98 98 125 125
Voltage range VDC 12~310 12~310 12~310 12~310 12~310 12~310 24~310 24~310
Speed Range RPM 1000~3000
Weight Kg 1.5 1.5 1.9 1.9 2.6 2.6 4 4


86ZW3S.gif

Customization:

Shaft.jpgEncoder.jpgBrake11.jpgConnector.jpgPulley.jpg
 Shaft EncoderBrake Connector Pulley 





1. Shaft Extensions: All motors can be supplied with single or double ended shaft, according to per customer's request. The length of shaft can made as per customer's request too.
2. Encoder option: All motors can be supplied with different revolution encoder according to customer’s request. 
3. Brake option: All motors can be supplied with brake with or without hand release. 
4. Cable harness: Cable harness with or without connectors can be supplied according customer’s request.
5. Pulley & pinion gear: Pulley or pinion gear is available according to customer's request.

Powered by MetInfo 5.3.18