42ZW3Y Series brushless DC motor

  • Winding typeYWE
  • Hall effect angle120 Degree electrical angle
  • Radial play0.02mm/460g
  • End play0.02mm/400g
  • Max. radial force15N @ 10mm from the flange
  • Max. axial force10N
  • Insulation classB
  • Dielectric strength500VDC for one minute
  • Insulation resistance100MΩ min., 500VDC

The brushless dc motors are widely used in such varied applications as office equipment, pumps, textile machines and much more.

Specifications:

Model Units 42ZW3Y45A20 42ZW3Y45A40 42ZW3Y45A60 42ZW3Y54A20 42ZW3Y54A40 42ZW3Y54A60 42ZW3Y75A20 42ZW3Y75A40 42ZW3Y75A60
Number of poles
4
Number of phase
3
Rated voltage VDC 24
Rated speed RPM 2000 4000 6000 2000 4000 6000 2000 4000 6000
Continuous stall torque N.m 0.048 0.048 0.048 0.096 0.096 0.096 0.192 0.192 0.192
Rated torque N.m 0.04 0.04 0.04 0.08 0.08 0.08 0.16 0.16 0.16
Rated power W 8.4 16.75 25 21 42 63 33.5 67 100
Peak torque N.m 0.12 0.12 0.12 0.25 0.25 0.25 0.45 0.45 0.45
Peak current A 1.34 2.68 4 3.7 7 10.5 5.6 11.2 16.8
Torque constant Nm/A 0.075 0.04 0.028 0.075 0.043 0.029 0.075 0.043 0.029
Back E.M.F V/KRPM 8 4.6 3 8 4.6 3 8 4.6 3
Rotor inertia g.c㎡ 14.6 14.6 14.6 20.3 20.3 20.3 38 38 38
Body length mm 43 43 43 54 54 54 73 73 73
Voltage range VDC 24~48
Speed Range RPM 2000~15000
Weight Kg 0.37 0.37 0.37 0.46 0.46 0.46 0.63 0.63 0.63


42ZW3Y.gif

Customization:

Shaft.jpgEncoder.jpgBrake11.jpgConnector.jpgPulley.jpg
 Shaft EncoderBrake Connector Pulley 





1. Shaft Extensions: All motors can be supplied with single or double ended shaft, according to per customer's request. The length of shaft can made as per customer's request too.
2. Encoder option: All motors can be supplied with different revolution encoder according to customer’s request. 
3. Brake option: All motors can be supplied with brake with or without hand release. 
4. Cable harness: Cable harness with or without connectors can be supplied according customer’s request.
5. Pulley & pinion gear: Pulley or pinion gear is available according to customer's request.

Powered by MetInfo 5.3.18